Want to Install an Asphalt Driveway? by Edwin Reitstein

27 Sep 2016 - 14:39:38
A nice level, smooth driveway is the fervent wish of many homeowners. In reality, though, it's harder to achieve than one might think. Concrete driveway sealing drying times is expensive and takes a significant amount of time to set. Asphalt is inexpensive and sets within hours.

If you're repairing an existing asphalt driveway, before driveway sealing drying times you consider taking on the more expensive project of laying new asphalt you may want to look at concrete driveway sealing contractors some cheaper alternatives. For a generally cracked, ugly driveway, you can buy driveway sealer and crack sealer from most any hardware or home improvement store. This is the fast, cheap way to seal up cracks, seal the surface as a whole, and black it again. For everything else, you'll want hot-mix asphalt.

Hot-mix asphalt is the very same asphalt you see burly highway road crews laying down. For the homeowner, though, hot-mix asphalt does not involve big machines. It's the same material but the application process is more basic. Hot-mix asphalt is an aggregate of gravel and sand mixed in with hot, liquid asphalt. When we say "hot" we mean it. Hot-mix applies at over 300 degrees F, and quickly cools to a workable 175 degrees F.

With hot-mix asphalt driveway, you have two options: overlay or full-depth asphalt paving. As the name implies, overlay is a thin "overlay" of a thin layer of asphalt driveway over your existing driveway. Your existing driveway, as bad as it might be, still needs to provide a firm, substantial base, or this option will not work. The second option is to jackhammer your existing driveway and lay down a full-depth asphalt driveway.

As you can guess, the full-depth asphalt driveway is the more expensive option. Not only do you incur the cost of jackhammering the existing drive, but you must lay down a bed of gravel before the asphalt. Oh, and did we mention that the layer of asphalt must also be thicker? That adds to the cost, too.

Read up as much on the subject as you can before calling any contractors. The topic of asphalt driveway paving is pretty much dominated by the industry, with few voices dedicated to the consumer.



For more information, come see us at http://www.EasyRenovate.com

Admin · 19 vistas · Escribir un comentario

Vínculo permanente hacia el artículo completo

http://nicetailor96.hazblog.com/Primer-blog-b1/Want-to-Install-an-Asphalt-Driveway-by-Edwin-Reitstein-b1-p26.htm

Comentarios

Este artículo no tiene Comentario por el momento .....


Escribir un comentario

Estatuto de los nuevos comentarios: Publicado





Se mostrará tu URL


Por favor introduce el código contenido en las imágenes.


Texto del comentario

Opciones
   (Salvar el nombre, el mail y la URL en los cookies)


  

Calendario

Octubre 2018
LunMarMierJueVierSabDom
 << < > >>
  12345
6789101112
13141516171819
20212223242526
2728293031  

Anuncio

¿Quién está en línea?

Miembro: 0
Visitante: 1

rss Sindicación